Little Mark III
The incredible international success of the Little Mark II has inspired this new, updated and upgraded version! The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit. All this with the same compact size and weight of its famous predecessor!
 
Photos

INPUTS

INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 100 Kohm, max. voltage 25 Vpp
EFFECT RETURN
impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

GAIN
-60 dB to +23 dB range
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT
switch on rear panel
PRE/POST EQ
switch on rear panel

EQUALIZATION

LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)
 

OUTPUT

LINE OUT
balanced XLR, max. voltage 20 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
SPEAKER OUT
speakon/1/4" combo, 1/4"
 

OTHER

WEIGHT
6.39 lbs / 2.9 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)


NOTES:
Minimum ohm load for all Markbass heads is 4 ohms.

Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage.
Due to homologation issues, the voltage may not be changed.

Rack ears do not come included with this head.

Product specifications are subject to change without notice
 

Little Mark series and CMD combo heads - owner manual
D_LMIII_LM800_CHII_LM250_LMTUBE_LMTUBE800_LIGHT.pdf (Size: 705 kb)
    Preamps
    Power Amps